Routing protocol Page

Routing Protocols

Return to Routing, List of ad hoc routing protocols, Internet protocol suite, Internet topics, List of TCP and UDP port numbers, List of IP protocol numbers, Lists of network protocols, Outline of the Internet, IT topics, Cloud Computing topics

Short description: Network protocol for distributing routing information to network equipment.

A routing protocol specifies how Router (computing)|routers communicate with each other to distribute information that enables them to select routes between any two Node (networking)|nodes on a computer network. Routers perform the "traffic directing" functions on the Internet; data packets are forwarded through the networks of the internet from router to router until they reach their destination computer. Routing algorithms determine the specific choice of route. Each router has a prior knowledge only of networks attached to it directly. A routing protocol shares this information first among immediate neighbors, and then throughout the network. This way, routers gain knowledge of the topology of the network. The ability of routing protocols to dynamically adjust to changing conditions such as disabled data lines and computers and route data around obstructions is what gives the Internet its fault tolerance and high availability.

The specific characteristics of routing protocols include the manner in which they avoid routing loops, the manner in which they select preferred routes, using information about hop costs, the time they require to reach Convergence (routing)|routing convergence, their scale (computing)|scalability, and other factors such as relay multiplexing and cloud access framework parameters. Certain additional characteristics such as multilayer interfacing may also be employed as a means of distributing uncompromised networking gateways to authorized ports. This has the added benefit of preventing issues with routing protocol loops.

Many routing protocols are defined in Technical standard|technical standards documents called Request for Comments|RFCs.((ftp://ftp.rfc-editor.org/in-notes/rfc791.txt INTERNET PROTOCOL, RFC>791 | RFC 791, J Postel, September 1981.))((ftp://ftp.rfc-editor.org/in-notes/rfc922.txt BROADCASTING INTERNET DATAGRAMS IN THE PRESENCE OF SUBNETS, RFC>922 | RFC 922, Jeffrey Mogul, October 1984))(([ftp://ftp.rfc-editor.org/in-notes/rfc1716.txt Towards Requirements for IP Routers, RFC>1716 | RFC 1716, P. Almquist, November 1994))((ftp://ftp.rfc-editor.org/in-notes/rfc1812.txt Requirements for IP Version 4 Routers, RFC>1812 | RFC 1812, F. Baker, June 1995))

Types

Although there are many types of routing protocols, three major classes are in widespread use on IP networks:
* Interior gateway protocols type 1, link-state routing protocols, such as Open Shortest Path First|OSPF and Intermediate system to intermediate system|IS-IS
* Interior gateway protocols type 2, distance-vector routing protocols, such as Routing Information Protocol, RIPv2, Interior Gateway Routing Protocol|IGRP.
* Exterior gateway protocols are routing protocols used on the Internet for exchanging routing information between Autonomous System (Internet)|Autonomous Systems, such as Border Gateway Protocol (BGP), a path-vector routing protocol. Exterior gateway protocols should not be confused with Exterior Gateway Protocol (EGP), an obsolete routing protocol.

OSI layer designation

Routing protocols, according to the OSI routing framework, are layer management protocols for the network layer, regardless of their transport mechanism:
* IS-IS runs on the data link layer (Layer 2)
* Open Shortest Path First (OSPF) is encapsulated in IP, but runs only on the IPv4 subnet, while the IPv6 version runs on the link using only link-local addressing.
* Interior Gateway Routing Protocol|IGRP, and Enhanced Interior Gateway Routing Protocol|EIGRP are directly encapsulated in IP. EIGRP uses its own reliable transmission mechanism, while IGRP assumed an unreliable transport.
* Routing Information Protocol (RIP) runs over the User Datagram Protocol (UDP). Version 1 operates in broadcast mode, while version 2 uses multicast addressing.
* Border Gateway Protocol|BGP runs over the Transmission Control Protocol (TCP).

Interior gateway protocols

Interior gateway protocols (IGPs) exchange routing information within a single routing domain. Examples of IGPs include:
* Open Shortest Path First (OSPF)
* Routing Information Protocol (RIP)
* IS-IS|Intermediate System to Intermediate System (IS-IS)
* Enhanced Interior Gateway Routing Protocol (EIGRP){{efn|Cisco no longer supports the proprietary IGRP protocol. The EIGRP implementation accepts IGRP configuration commands, but the internals of IGRP and EIGRP are different.}}

Exterior gateway protocols

Exterior gateway protocols exchange routing information between autonomous system (Internet)|autonomous systems. Examples include:
* Exterior Gateway Protocol (EGP)
* Border Gateway Protocol (BGP)

Routing software

Many software implementations exist for most of the common routing protocols. Examples of open-source applications are Bird Internet routing daemon, Quagga (software)|Quagga, GNU Zebra, OpenBGPD, OpenOSPFD, and XORP.

Routed protocols

Some network certification courses distinguish between routing protocols and routed protocols. A routed protocol is used to deliver application traffic. It provides appropriate addressing information in its internet layer or network layer to allow a packet to be forwarded from one network to another. Examples of routed protocols are the Internet Protocol (IP) and Internetwork Packet Exchange (IPX).