Sdkman install Page
SDKman install
Return to SDKman
https://sdkman.io/install
Installation
Installing SDKMAN! on UNIX-like platforms is as easy as ever. SDKMAN! installs smoothly on macOS, Linux, WSL, Cygwin, Solaris and FreeBSD. We also support Bash and ZSH shells.
Simply open a new terminal and enter:
$ curl -s "https://get.sdkman.io" | bash
Follow the instructions on-screen to complete installation.
Next, open a new terminal or enter:
$ source "$HOME/.sdkman/bin/sdkman-init.sh"
Lastly, run the following code snippet to ensure that installation succeeded:
$ sdk version
If all went well, the version should be displayed. Something like:
sdkman 5.16.0
Windows Installation
Several options exist for installing SDKMAN! on Windows today.
The first solution involves installing Windows Subsystem for Linux (WSL) prior to attempting SDKMAN installation. You need a basic toolchain including bash, zip, unzip, and curl (tar and gzip required for special cases). Most likely it will work out of the box.
Another solution involves installing Cygwin prior to attempting SDKMAN installation. For our software to function, we require that Cygwin is installed with the same toolchain as described for WSL.
The third solution is for Git users using the Git Bash for Windows environment. In order for this to work, the environment needs to be supplemented with MinGW to add the necessary toolchain to function.
Please be aware that as SDKMAN is written in bash, it requires a bash environment to be present. SDKMAN can not be installed natively on Windows and requires WSL, Cygwin or MSYS+MinGW.
Beta Channel
For the more adventurous among us, we have a beta channel. All new CLI features will first be rolled out to this group of users for trial purposes. Beta versions can be considered stable for the most part, but might occasionally break. To join the beta channel, you can install it directly as follows:
$ curl -s "https://beta.sdkman.io" | bash
If you already have the stable version installed, simply update the ~/.sdkman/etc/config file as follows:
sdkman_beta_channel=true
Next, open a new terminal and perform a forced update with:
$ sdk selfupdate force
To leave the beta channel, simply set the above config back to false and follow the same procedure.
Uninstallation
In the unlikely event that you would like to uninstall SDKMAN!, we don't have an automated way of doing this yet. If you really do want to remove it from your system, it is very easy to do so.The following will guide you through backing up, then removing the entire installation from your system.
tar zcvf ~/sdkman-backup_$(date +%F-%kh%M).tar.gz -C ~/ .sdkman
$ rm -rf ~/.sdkman
The last step involves editing and removing the initialisation snippet from your .bashrc, .bash_profile and/or .profile files. If you use ZSH, remove it from the .zshrc file. The snippet of code to be removed looks something like this:
#THIS MUST BE AT THE END OF THE FILE FOR SDKMAN TO WORK!!!
-s "/home/dudette/.sdkman/bin/sdkman-init.sh" && source "/home/dudette/.sdkman/bin/sdkman-init.sh"
Once removed, you have successfully uninstalled SDKMAN! from your machine.
Installing to a Custom Location
It is possible to install SDKMAN! to a custom location other than $HOME/.sdkman. This can be achieved by exporting your custom location as SDKMAN_DIR prior to installing.
Simply open a new terminal and enter:
$ export SDKMAN_DIR="/usr/local/sdkman" && curl -s "https://get.sdkman.io" | bash
For this to work it is vital that your user has full access rights to this folder.It is also important that the folder does not exist as SDKMAN! will attempt to create it.
Installing without Modifying Shell Config
There are situations where it isn't appropriate for the installer to modify your shell config automatically, such as unattended installs or when reinstalling. In those situations, appending rcupdate=false as a parameter when downloading the installer will cause it to skip that portion of the installation process.
$ curl -s "https://get.sdkman.io?rcupdate=false" | bash
That's all there is to it! Next we will look at SDKMAN Usage.
Sample Installation Output
curl -s "https://get.sdkman.io" | bash
-+syyyyyyys:
`/yho:` -yd.
`/yh/` +m.
.oho. hy .`
.sh/` :N` `-/o` `+dyyo:.
.yh:` `M- `-/osysoym :hs` `-+sys: hhyssssssssy+
.sh:` `N: ms/-`` yy.yh- -hy. `.N-````````+N.
`od/` `N- -/oM- ddd+` `sd: hNNm -N:
:do` .M. dMMM- `ms. /d+` `NMMs `do
.yy- :N` ```mMMM. - -hy. /MMM: yh
`+d+` `:/oo/` `-/osyh/ossssssdNMM` .sh: yMMN` /m.
-dh- :ymNMMMMy `-/shmNm-`:N/-.`` `.sN /N- `NMMy .m/
`oNs` -hysosmMMMMydmNmds+-.:ohm : sd` :MMM/ yy
.hN+ /d: -MMMmhs/-.` .MMMh .ss+- `yy` sMMN` :N.
:mN/ `N/ `o/-` :MMMo +MMMN- .` `ds mMMh do
/NN/ `N+....--:/+oooosooo+:sMMM: hMMMM: `my .m+ -MMM+ :N.
/NMo -+ooooo+/:-....`...:+hNMN. `NMMMd` .MM/ -m: oMMN. hs
-NMd` :mm -MMMm- .s/ -MMm. /m- mMMd -N.
`mMM/ .- /MMh. -dMo -MMMy od. .MMMs..---yh
+MMM. sNo`.sNMM+ :MMMM/ sh`+MMMNmNm+++-
mMMM- /--ohmMMM+ :MMMMm. `hyymmmdddo
MMMMh. ```` `-+yy/`yMMM/ :MMMMMy -sm:.``..-:-.`
dMMMMmo-.``````..-:/osyhddddho. `+shdh+. hMMM: :MmMMMM/ ./yy/` `:sys+/+sh/
.dMMMMMMmdddddmmNMMMNNNNNMMMMMs sNdo- dMMM- `-/yd/MMMMm-:sy+. :hs- /N`
`/ymNNNNNNNmmdys+/::----/dMMm: +m- mMMM+ohmo/.` sMMMMdo- .om: `sh
`.-----+/.` `.-+hh/` `od. NMMNmds/ `mmy:` +mMy `:yy.
/moyso+//+ossso:. .yy` `dy+:` .. :MMMN+---/oys:
/+m: `.-:::-` /d+ +MMMMMMMNh:`
+MN/ -yh. `+hddhy+.
/MM+ .sh:
:NMo -sh/
-NMs `/yy:
.NMy `:sh+.
`mMm` ./yds-
`dMMMmyo:-.````.-:oymNy:`
+NMMMMMMMMMMMMMMMMms:`
-+shmNMMMNmdy+:`
Now attempting installation...
Looking for a previous installation of SDKMAN...
Looking for unzip...
Looking for zip...
Looking for curl...
Looking for sed...
Installing SDKMAN scripts...
Create distribution directories...
Getting available candidates...
Prime the config file...
Installing script cli archive...
* Downloading...
######################################################################## 100.0%
* Checking archive integrity...
* Extracting archive...
* Copying archive contents...
* Cleaning up...
* Downloading...
######################################################################## 100.0%
* Checking archive integrity...
* Extracting archive...
* Copying archive contents...
* Cleaning up...
Set version to 5.16.0 ...
Set native version to 0.0.15 ...
Attempt update of interactive bash profile on regular UNIX...
Added sdkman init snippet to /home/USERNAME/.bashrc
Attempt update of zsh profile...
Updated existing /home/USERNAME/.zshrc
All done!
You are subscribed to the STABLE channel.
Please open a new terminal, or run the following in the existing one:
source "/home/USERNAME/.sdkman/bin/sdkman-init.sh"
Then issue the following command:
sdk help
Enjoy!!!
[USERNAME@localhost jetbrains-toolbox-1.26.1.13138]$ sdk version
BROADCAST =
* 2022-10-06: quarkus 2.13.1.Final available on SDKMAN! https://github.com/quarkusio/quarkus/releases/tag/2.13.1.Final
* 2022-10-05: jbang 0.99.0 available on SDKMAN! https://github.com/jbangdev/jbang/releases/tag/v0.99.0
* 2022-10-03: vertx 4.3.4 available on SDKMAN!
SDKMAN 5.16.0
{{navbar_footer}}